Can this circuit handle it?
Add what's plugged in on one circuit and see if you're over the safe limit — before the breaker trips or the wire heats up.
1 — WHAT BREAKER IS IT ON?
The number is printed on the breaker handle. Not sure? Assume 15 — it's the safer guess.
2 — ADD WHAT'S PLUGGED IN (TAP TO ADD)
Label only shows amps? Multiply by 120 to get watts (10A × 120 = 1,200W).
Add what's plugged in
Tap the devices that share this circuit — every outlet and light fed by the same breaker counts, not just the one outlet.
Wattages are typical label values — check yours, they vary. Assumes a standard 120V US circuit. This is a planning tool, not an inspection: a breaker that trips repeatedly, warm outlets, or a burning smell mean call an electrician.
// SEND THIS TO SOMEONE WHO NEEDS IT
“Add what's plugged in on one circuit and see if you're over the safe limit — before the breaker trips or the wire heats up.”